Review: SPARROW W500

We have discussed a lot of times how air pollution can affect human health in the long-term. However, there is one pollutant that can have a severe impact on our health even in small concentrations in the short-term: Carbon Monoxide (CO).

Carbon Monoxide is a colourless, odourless toxic gas. Carbon monoxide poisoning is the most common type of fatal air poisoning in many countries around the world because it is hard to detect with our senses and it is classified as highly toxic.

About half of the carbon monoxide in Earth’s atmosphere is anthropogenic from the burning of fossil fuels (diesel and gasoline), oil, paraffin, propane, natural gas, trash, and biomass.

Here comes SPARROW W500 Air Quality Monitor by ECO SENSORS, a small portable monitor that can follow you anywhere. It is designed to alert you when high CO concentrations are present.

Hardware

  • Carbon Monoxide Sensor by SPEC Sensors
  • Humidity Sensor
  • Temperature Sensor
  • Alarm (audible buzzer)
  • Multicolour LED Light
  • Bluetooth Connection
  • Micro-USB port

SPARROW is super small  5.6cm x 3.3cm x 1cm and super light as it weighs 18g/0.03 lbs. You can pair it with a smartphone (iOS and Android) but also it can operate on its own as the buzzer and the Yellow/Red/Purple LED light can notify you when there are significant CO concentrations around. When the CO concentrations are safe the Green LED light will always flash once per second, except when charging, after all it can inform you about the CO concentrations without the need to launch the app or take your phone into your hands.

The battery will last 2 plus weeks, which is great for those who don’t want to charge one more device every day or so. I have set it with a 1 minute data log rate. The device has a button that you need to press every-time you want to connect it with the phone, that way the Bluetooth connection is established at the moment, otherwise the SPARROW would have to be in a mode where it was always broadcasting for Bluetooth signal, which is a huge power drain for both devices, phone and the air quality monitor.

Fortunately, my house is CO free as I don’t burn anything but we all travel and for those with a garage it is a mandatory device to have. In the picture below you can see the device inside a closed jar with smoke from a burning match as I wanted to stimulate the sensor and simulate the CO concentrations. I must say the CO sensor is a lot more stable and cross-sensitivity proof which means other gases won’t affect the measurements.

SPARROW_Jar CO

SPARROW comes with a carabiner clip but there is an option to attach it on the back of a phone case with a special mount system the case maker OtterBox has developed and they support many cases for iOS, Android phone, and tablets.

SPARROW Animation Case

The App

Visually, the app is not pretty but it does the job. There are a lot of options to tweak and to adjust the app and device to your needs but it lacks a better user experience UX though a better user interface UI. Of course, this is something that can be fixed with future app updates.

You can share the measurements (data Log file) via email which is a neat feature but they go a step further and you can connect the device with the micro-USB cable to your computer and enable direct communication, however, this is an advanced feature.

The app allows you to select different data log rates between 1 second / 10 seconds / 1 minute / 10 minutes / 1 hour / 1 day. There is another cool option to enable if you want  the device not to keep low CO concentrations in the log file, that way you don’t have a huge  amount of data entries to process later on, like in my case.

Literally, you can customise the device to your needs even by changing the Sensitivity mode for different thresholds. You can measure in parts per million (ppm) or milligrams per cubic meter (mg/m³). You can set up emergency messaging by allowing SPARROW app to send messages to emergency contacts when very high concentrations are detected.

Premium mobile phone screen mockup template

 

Conclusion

Breathing CO can cause a series of health issues. Unknowingly, exposure to moderate levels of CO over long periods of time has also been linked with an increased risk of heart disease. If your environment is surrounded by vehicles (suitable for #VanLife) or other sources of burning fossil fuels then having such a device that can guard your health is worth investing in. SPARROW W500 is one of them.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s